It is particularly important to choose an appropriate slope protection scheme in road construction projects. Let the timeliness of steel-plastic grille and other products be infinitely enlarged. In the past construction process, pure masonry structures such as face wall, shotcrete, spray-mix, anchor shotcrete and other pure masonry structures were mostly used for slope protection. Although its initial stability and anti-erosion effect It is better, but as time goes by, the effect will gradually weaken due to the weathering of rocks, the aging of concrete, and the corrosion of steel bars.
Road and bridge geotextiles are currently known as one of the "four major building materials" like cement, steel, and wood.
The most important thing in the revetment project is the foot protection. If the foot protection project is not done well, it will be eroded when it is washed, and the block stones of the foot protection will be damaged in a large area. Therefore, during construction, the riprap revetment should be extended to the river bed. Expected washout area outside. When laying the geotextile filter layer, the continuity of the geotextile should be ensured, so that when the geotextile is bent and folded, it will not cause poor contact between the geotextile and the soil.

Non-woven geotextile is a network made of irregularly arranged fibers bonded and needle punched. Commonly used are needle-punched non-woven geotextiles. This type of geotextile has strong compressibility, large porosity, and good water conductivity, which is better than woven geotextiles.
Geotextiles have many functions such as anti-seepage, reverse filtration, drainage, isolation, reinforcement, protection, and sealing. Compared with conventional masonry and concrete materials, it has low investment, simple construction technology, short construction period, It has the advantages of good infiltration effect and high channel effective utilization coefficient.