In life, non-woven fabrics can be seen everywhere, and they are widely used in all walks of life. However, for colored non-woven fabrics, the brightness of their appearance is a very important indicator. So what methods can be used to make customized non-woven fabrics more bright? Next, Shuntai Textiles will share with you some small knowledge points, hoping to be helpful to everyone.
If you want to make customized non-woven fabrics more vivid, you can achieve it through the following methods:
1. Sufficient pressure
The pressure can be adjusted according to the required thickness of the non-woven fabric to prevent it from being weak, not bright and easy to wrinkle, because the thickness of non-woven fabrics is different.
2. Control the temperature
There should be no water droplets or water vapor during the production process of coated non-woven fabrics, and the temperature of the non-woven fabrics can be appropriately increased. In addition, the temperature of the electric heating steel drum must be adjusted according to the products covered by the non-woven fabrics.
3. Clean the roller
Because the roller is in direct contact with the non-woven surface, and coupled with the separation of the spacing, a lot of glue will be pressed directly onto the roller, which will accumulate over time. Remember to clean it regularly.
There are many manufacturers on the market who pay too much attention to quality during the production process and often ignore its appearance. However, customers generally pay attention to appearance during the purchasing process, so in order to make it more vivid, you can try the above method.