There are many non-woven products, and non-woven handbags are the most common non-woven products. Non-woven handbags are very simple to make, energy-saving and environmentally friendly, and are now very popular handbags.
Introduction to the production process of non-woven handbags:
1. Fabric selection of non-woven handbags
Why should the fabric of the non-woven bag have a glossy surface? This is because the surface gloss of the fabric is to prepare for the later printing. One is good printing, and the other is that the printed effect will be very good. In this way, the overall effect will be very prominent, and such shopping bags will definitely be deeply loved by consumers when they are taken out.
2. Fabric cutting and cutting of non-woven handbags
After the non-woven fabric is produced, it is stored in the warehouse. The next thing is how to make these large rolls of non-woven fabric into bags. First of all, we need to cut the fabric into small pieces of the size we need with an automatic slicer and strip cutter according to the size. Among them, the cut large piece is the three-sided complex of the front and back plus the bottom for printing. Then there are the sides, handles, and edge strips. This is the so-called cutting strip, which refers to the handle and edge, because they are very narrow, so they must be cut into very small strips to match the processing of the finished product.
3. Printing process of non-woven handbags
We generally use screen printing for non-woven handbags, because it is hand-printed piece by piece, so its speed and progress will be slower than machine printing, and of course the cost will be higher than machine printing It is a bit higher, but its advantages are also obvious, it can be printed in a small amount, and the error rate is relatively low. When printing, pay attention to the fullness of the printed text and pattern, and the grasp of the size should be able to highlight the effect of the entire shopping bag.
